6.4.3.� Scrap W/O Material from W/O

To scrap Work Order Materials which have been specifically issued to a Work Order using a Material Issue transaction, select the "Scrap W/O Material from Work Order" option. The following screen will appear:

Scrap Work Order Material from Work Order

Tip

You may only scrap W/O Materials which have been specifically issued to a Work Order. In other words, Material Requirements having the Push issue method may be scrapped.

When scrapping Work Order Materials from a Work Order, you are presented with the following options:

Work Order #: Enter the Work Order Number of the Work Order whose materials you want to scrap.
Whs.: Displays Warehouse code automatically when Work Order Number is entered into "Work Order #" field.
Item Number: Displays Item Number automatically when Work Order Number is entered into "Work Order #" field.
UOM: Inventory Unit of Measure.
Status: Displays Work Order Status automatically when Work Order Number is entered into "Work Order #" field.
Top-Level Finished Item: Select if you want to scrap parent-level Items.
Qty. to Scrap: Enter the quantity of top-level finished Items you want to scrap. You may scrap top-level Items after they have been received into Inventory—or before. Keep in mind that if you scrap top-level Items prior to receiving them, material requirements for those Items may or may not have been issued to the Work Order yet. You should make any necessary adjustments to account for those requirements. For example, you may need to issue the components—either manually or through a material backflush—and then scrap them retroactively.

Tip

Shop Floor Workbench users should only scrap top-level Items after they have posted production sufficient to cover the scrap quantity. For example, if a user assembles 10 top-level Items successfully but significantly damages the 11th, the user should post a quantity of 11 produced and then scrap one (i.e., 11 - 1 = 10).

Scrap Component: Select if you want to scrap component Items issued to the Work Order.
Component Item Number: Select one of the component Items from the parent Item's Work Order Material Requirements will be listed.

Note

You may scrap component Items regardless of their issue method. However, components must first be issued to a Work Order before they can be scrapped from it. Components are issued to Work Orders either manually or through a material backflush.
UOM: Inventory Unit of Measure.
Qty. Per: Displays the component quantity per each specified on the parent Item's Work Order Material Requirements.
Scrap %: Displays the component scrap percentage specified on the Item's Bill of Materials.
Qty. Required: Displays the component quantity required to fulfill the Work Order Material Requirements.
Qty. Issued: Displays the component quantity currently issued to the Work Order. You may only scrap components which have already been issued to a Work Order—either manually or through a material backflush.
Qty. Scrapped from WIP: Displays a running total of the component quantity already scrapped—if any.

Tip

You may not scrap the full quantity of a Work Order Material Requirement from a Work Order.
Qty. to Scrap: Enter the quantity of the component Item you want to scrap from the Work Order.

To the far right of the screen, the following buttons are available:

CLOSE: Closes the screen without scrapping the material from the Work Order.
SCRAP: Scraps the specified quantity of the component Item from the Work Order.

6.4.3.� Scrap W/O Material from W/O

Tip

Tip

Note

Tip